タグ:ホンダ
1/24 VW バン たまごガールズ2015 サマー【12】
1/24 VW バン たまごガールズ2015 サマーを製作しています
1/24 VW Ban Tamago Girls 2015 Summer is being produced
ホイールカバーの接着
セメダインのハイグレード模型用を使ってます
ホイールと少し隙間が有るみたいなので
Gクリアーでも良かったのですが
Gクリアー糸引きますからね
Adhesion of wheel cover
I am using Cemedine's high grade model
It seems there is a little gap between the wheel
Even though G clear was good
G clear yarn will draw
バックミラーを取り付けしてます
I attached the rearview mirror
ミラーのステー部分はインセクトピンのシャフト部分
ミラー面にはハセガワのミラーフィニッシュです
これにて完成
他の2台と
パート12で完成してますが12日で完成したわけでは有りません(^_^;)))
もっと日数は掛かってます
今までに作った中では今回のがデカールは楽でしたね
ルーバーの所に無かったので助かってますね
It is completed in part 12 but it is not completed in 12 days (^ _ ^;)))
It takes more days
In this moment I made decals a lot easier this time
I was saved because I was not at the louver
残りは2台………
あとの2台も上部のボディーカラーはメタリックにしたいですよね
完成した日は9/6でした
後になって写真や記事を見直すと
何か忘れてますね
気付いた方は居るかな?
The completion date was 9/6
Later on reviewing photos and articles
I forgot something
Do you know who you are aware of?
本当はメッキなんです(^_^;)))
Mall with from the top to the bottom of the front
It is actually plating (^ _ ^;)))
この写真ではシルバーに塗って有るのが判ると思います
I think that you can see that it is painted on silver in this picture
シルバーのエナメルで筆塗りしようかと思ってますが
まだしてません(^_^;)))
I am thinking about painting with brush with silver enamel
I have not done it yet.
昨夜エナメルで簡単に塗りました(^_^;)))
1/24 VW バン たまごガールズ2015 サマー【10】
1/24 VW バン たまごガールズ2015 サマーを製作しています
1/24 VW Ban Tamago Girls 2015 Summer is being produced
ホイールカバーです
色の指定はボディーの上部の色です
吹いたのはメッキの上にメタルプライマーを吹いてクレオスのディープクリアーブルーです
It is a wheel cover
Color designation is the color of the top of the body
I blew a creos deep clear blue by blowing a metal primer on the plating
乾燥後にVWの文字をシンナーで拭き取りました
完璧かと言われますと………(^_^;)))
VWの文字のデカール有りますが………
デカール貼るのも難しいですからね(^_^;)))
After drying I wiped VW letters with thinner
If it is said that it is perfect ... ... ... (^ _ ^;)))
I have a decal of VW characters, but .........
It is difficult to paste decals (^ _ ^;))
リアのガラスは簡単に取り付け出来ます
セメダインのハイグレードです
特に力も掛かりませんからね
The rear glass can be easily installed
It is a high grade of Cemedine
Especially it does not cost anything
フロントも簡単ですね
少しサイド部分で隙間が開くので
強力にエポキシで固定してます
ダッシュボード
灰皿が少し分厚かったかな?(^_^;)))
手持ちではこれ以上薄いプラ板が無いので仕方無いですね(^_^;)))
Dashboard
Was the ashtray a bit thick? (^ _ ^;)))
It can not be helped because there is no more thin plastic plate on hand (^ _ ^;)))
フロントガラスの固定第2弾
サイドの隙間を固定中
こちらのエポキシはエクセルエポですね
The second fixation of the windshield
Fixing side clearance
This epoxy is Excel Epo