2018年12月
フジミ ランボルギーニ・ムルシエラゴ【20】
フジミ ランボルギーニ・ムルシエラゴ【19】
フジミ ランボルギーニ・ムルシエラゴを製作しています
I am producing Fujimi Lamborghini / Murcielago
マスキングをしてます
I'm doing masking.
リアのバンパーも
黒サフを吹いてみました(゜ロ゜;ノ)ノ…………
I tried playing black suff (゜ ロ; ノ) ノ ............
まずは様子見ですよね(゜ロ゜;ノ)ノ…………
捨てサフですよね(^_^;)))…………
リアバンパー部の塗り分けは大丈夫ですね
フラットブラック分は黒サフです
シルバー部分はクレオスのスーパーメタリックシリーズのクロムシルバーを使ってます
It is okay to paint the rear bumper part separately
The flat black portion is black sub
Silver part is using Chrome Silver of Creos' Super Metallic series
テールランプを付けるとこんな感じですね
ファンは見えませんね(^_^;)))
今度は捨てサフと違って普通のサフです
捨てサフを600番→1000番と研ぎましたので
大丈夫そうですね
This time, unlike SUFF, it is an ordinary suff.
I abandoned the abandoned suff as 600 to 1000
It sounds fine.
フジミ ランボルギーニ・ムルシエラゴ【18】
フジミ ランボルギーニ・ムルシエラゴを製作しています
I am producing Fujimi Lamborghini / Murcielago
約1週間放置して
少し磨いたら………
何か白い線が………
う〜ん( -_・)?
デカール割れてる(゜ロ゜;ノ)ノ
クリアーが割れてるのかな?
Leave it for about 1 week
After a little brush .........
Something white wire .........
Yup( -_·)?
Decal is cracking (゜ ロ; ノ) ノ
Is Clear broken?
ダメ元で2000番で研いでシャビシャビクリアーを吹いてみました
これでダメなら潔くデカールを剥がして黒にしますわ
後々の事を考えると剥がす方が良いですからね
I blew Xavi Shabby Clear by sharpening it at No. 2000 at No. 2000
If you do not do this, I will clean up and peel off the decals and make it black
Because it is better to peel off after thinking about things later
デカールの密着が良くて
マスキングテープ貼ったり両面テープ貼ったりぐらいでは剥がれず
削ってます(((^_^;)
The decal's close contact is good
Masking tape sticking or double-sided tape sticking can not be peeled off
I'm scraping it. (((_ _ _;)
天井部分は剥がせました
残るは両サイドの所ですね
両サイドも後々悪さをしてはダメなので剥がして
Do not do bad things later on both sides so peel off
マスキング
一部ボカシで吹きます
こちらは普通にマスキングです
テールランプ部分はシルバー
電動ファンラジエターが有る所はフラットブラックですね
青島文化教材社(AOSHIMA)
2015-12-20
フジミ ランボルギーニ・ムルシエラゴ【17】
フジミ ランボルギーニ・ムルシエラゴを製作しています
I am producing Fujimi Lamborghini / Murcielago
今回からクリアー吹きになります
最初は砂吹きで
途中休憩しながら3回ぐらい回ったかな?
It will be a clear blow from this time
At first it's blowing sand
I wonder if it took about 3 times while taking a break.
今度は砂吹きよりもう少しウェットに近く
でもまだまだ軽くですね
これも3回ぐらい回りました
This time it is closer to a bit more wet than sand blowing
But it is still light yet
This also took about 3 times
この後6時間ぐらい開けて
簡単に埃を落として
ウェットで吹いてます
Open for about 6 hours after this
Easily drop dust
I'm blowing wet
カーボンデカールの所何も無ければ良いのですが
I will dry for 2-3 days.
I hope there is nothing on the carbon decal
吹き終わって4時間経過した状態です
It is 4 hours after blowing
次の日の昼
Next day afternoon